메뉴 건너뛰기

2016.04.05 00:14

Installing on VMware vib

조회 수 14 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
Use the following procedure to install the .vib files for VMware ESXi 5.5 or VMware ESXi 6.0. Perform the installation from a remote system running a Telnet/SSH client. Use a terminal emulator to access the ESXi server remotely.
  1. Copy the following files from the installer download location to the /tmp directory on your local ESXi server (see Downloading the Installation Packages for details):
    • vmware-esx-provider-arcconf.vib
    • vmware-esx-provider-arcsmis.vib

    The arcconf.vib is for command line communication.

    The arcsmis.vib is for remote management communication.

  2. Check for existing installation of arcconf. esxcli software vib list | grep arcconf
  3. Remove the existing arcconf package. esxcli software vib remove -n arcconf When the package is removed, you receive the message "Reboot Required: false."
  4. Check for an existing installation of arc-cim-provider. esxcli software vib list | grep arc-cim-provider
  5. Remove the existing arc-cim-provider package. esxcli software vib remove -n arc-cim-provider When the package is removed, you receive the message "Reboot Required: true."
  6. Set the installation acceptance level to either PartnerSupported or CommunitySupported: esxcli software acceptance set –-level=PartnerSupported
  7. Install the arcconf package. esxcli software vib install --no-sig-check -v /tmp/vmware-esx-provider-arcconf.vib When the package is installed, you receive the message "Reboot Required: false."
  8. Install the arc-cim-provider package. esxcli software vib install --no-sig-check -v /tmp/vmware-esx-provider-arc-cim-provider.vib When the package is installed, you receive the message "Reboot Required: true."
  9. Reboot the system.
  10. Continue the installation with Installing on a Guest Operating System.