메뉴 건너뛰기

조회 수 253 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
# VMware NAT configuration file

[host]

# NAT gateway address
ip = 172.16.158.2
netmask = 255.255.255.0

# VMnet device if not specified on command line
device = /dev/vmnet8

# Allow PORT/EPRT FTP commands (they need incoming TCP stream ...)
activeFTP = 1

# Allows the source to have any OUI.  Turn this on if you change the OUI
# in the MAC address of your virtual machines.
allowAnyOUI = 1

# Controls if (TCP) connections should be reset when the adapter they are
# bound to goes down
resetConnectionOnLinkDown = 1

# Controls if (TCP) connection should be reset when guest packet's destination
# is NAT's IP address
resetConnectionOnDestLocalHost = 1

[tcp]

# Value of timeout in TCP TIME_WAIT state, in seconds
timeWaitTimeout = 30

[udp]

# Timeout in seconds. Dynamically-created UDP mappings will purged if
# idle for this duration of time 0 = no timeout, default = 60; real
# value might be up to 100% longer
timeout = 60

[netbios]
# Timeout for NBNS queries.
nbnsTimeout = 2

# Number of retries for each NBNS query.
nbnsRetries = 3

# Timeout for NBDS queries.
nbdsTimeout = 3

[incomingtcp]

# Use these with care - anyone can enter into your VM through these...
# The format and example are as follows:
#<external port number> = <VM's IP address>:<VM's port number>
#8080 = 172.16.3.128:80
3389 = 172.16.158.130:3389
5612 = 172.16.158.130:5612
5613 = 172.16.158.130:5613
5614 = 172.16.158.130:5614


[incomingudp]

# UDP port forwarding example
#6000 = 172.16.3.0:6001