메뉴 건너뛰기

조회 수 33 추천 수 0 댓글 0
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄
?

단축키

Prev이전 문서

Next다음 문서

크게 작게 위로 아래로 댓글로 가기 인쇄

Manual Rebuild using ARCCONF (Command Line Utility)

Use the ARCCONF command 'setstate' in order to assign the newly added drive to be a hot spare. Enter the number of the logical device that is in degraded state and needs to be rebuilt. In this example, the new drive on Channel 0 ID 0 is to be added as a hot spare for Logical Drive 1.

ARCCONF SETSTATE 1 DEVICE 0 0 HSP LOGICALDRIVE 1

For further information on ARCCONF, please refer to the Command Line Interface User's Guide


출처 - http://ask.adaptec.com/app/answers/detail/a_id/17082/~/how-to-rebuild-a-degraded-raid-array-on-a-sata-or-sas-raid-controller%3F


List of Articles
번호 제목 글쓴이 날짜 조회 수
7 Correcting Hard Disk Failures with Adaptec RAID Controllers using ARCCONF 맨하탄노숙자 2017.02.07 1
» Manual Rebuild using ARCCONF (Command Line Utility) 맨하탄노숙자 2016.04.30 33
5 HP Smart Array CLI commands 맨하탄노숙자 2016.02.18 32
4 SoftRAID Check 맨하탄노숙자 2015.12.11 69
3 RAID Performance file 맨하탄노숙자 2015.07.22 21
2 RAID Level 비교 file 맨하탄노숙자 2015.06.01 25
1 RAID Optimizing Logical Drive Performance 맨하탄노숙자 2015.05.22 37
Board Pagination Prev 1 Next
/ 1